Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used either in the normal use
position against the ear or when positioned at least 2.2 centimeters (7/8 inch)
away from the body. When a carry case, belt clip or holder is used for body-worn
operation, it should not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a good quality connection to
the network. In some cases, transmission of data files or messages may be delayed
until such a connection is available. Ensure the above separation distance instructions
are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device.
Do not place credit cards or other magnetic storage media near the device,
because information stored on them may be erased.
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones,
may interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine
if they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF energy.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
94
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters
(6 inches) be maintained between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are consistent
with the independent research by and recommendations of Wireless Technology
Research. Persons with pacemakers should:
•
Always keep the device more than 15.3 centimeters (6 inches) from
the pacemaker;
•
Not carry the device in a breast pocket; and
•
Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference
occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
that may apply to the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same compartment as the device, its
parts, or enhancements. For vehicles equipped with an air bag, remember that air
bags inflate with great force. Do not place objects, including installed or portable
wireless equipment in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may
be dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
95
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even death.
Switch off the device at refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel depots, storage, and
distribution areas, chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), and areas
where the air contains chemicals or particles such as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal strength.
2. Press the end key as many times as needed to clear the display and ready
the phone for calls.
3. Enter the official emergency number for your present location.
Emergency numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless phone may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
96
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the
limits recommended by international guidelines. These guidelines were developed by
the independent scientific organization ICNIRP and include safety margins designed
to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. The actual SAR level of an
operating device can be well below the maximum value because the device is
designed to use only the power required to reach the network. That amount changes
depending on a number of factors such as how close you are to a network base
station. The highest SAR value when tested according to international testing
procedures for use at the ear is 0.60 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at http://www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.21 W/kg and when properly worn
on the body is 0.91 W/kg.
Information about this device can be found on the FCC's website at
http://www.fcc.gov/oet/fccid by searching the equipment authorization
system using FCC ID: QMNRM-193.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
97
■ Hearing aid compatibility (HAC)
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The M-value,
shown on the device box, refers to lower radio frequency (RF) emissions. A higher
M-value generally indicates that a device model has a lower RF emissions level,
which may improve the likelihood that the device will operate with certain hearing
aids. Some hearing aids are more immune than others are to interference. Please
consult your hearing health professional to determine the M rating of your hearing
aid and whether your hearing aid will work with this device. More information on
accessibility can be found at www.nokiaaccessibility.com.
■ Technical information
Feature
Specification
Dimensions
Width, 42.3 mm; length, 105.5 mm; depth, 18 mm
Weight
98 g with BL-6C Li-Ion Battery
Wireless networks
CDMA 800 and 1900 MHz, 800 AMPS,
and Bluetooth wireless technology
Volume
69 cc
Frequency range (Tx)
AMPS: 824.04—848.97 MHz
PCS: 1851.25—1908.75 MHz
Cellular: 824.70—848.37 MHz
Frequency range (Rx)
AMPS: 869.04—893.97 MHz
PCS: 1931.25—1988.75 MHz
Cellular: 869.70—893.37 MHz
GPS frequency
(2865i only)
1575.42 MHz
Bluetooth wireless
technology
2402.0—2480.0 MHz
A d d i t i o n a l s a f e t y i n f o r m a t i o n
98
■ Battery information
This section provides information about battery charging times with the Compact
Charger (AC-3), the Travel Charger (AC-4), talk-times, and standby times. Be aware
that the information in this section is subject to change. For more information,
contact your service provider.
Charging times
The following charging times are approximate with the BL-6C 1150 mAh
Li-ion battery:
Travel Charger (AC-4): up to 1 hour 45 minutes
Compact Charger (AC-3): up to 3 hours 45 minutes
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3 to 4 hours (digital)
Standby time: 6 to 10 days
I n d e x
99